On the 9th, in 2015, the announcement of the number of allocations for the Beijing Passenger Car Index in each period was issued, and at least 23,799 effective indicators should be allocated for each round of shaking.
According to the introduction of the Beijing Small Bus Indicators Control and Management Office, in 2015, the demonstration of the application of new energy minibus indicators was 30,000, an increase of 10,000 over last year. Among them, the personal indicator is 20,000. According to the principle of average distribution of integers, the first five periods are 3333 per period, which is an increase of 1667 compared with 1666 last year. The remaining 3335 indicators are allocated in the sixth period; the unit indicator is 10,000. The first five periods were 1,666 per period, the same as last year, and the remaining 1670 indicators were allocated in the sixth period.
This year, the index of ordinary passenger cars is 120,000, which is 10,000 less than last year. Among them, personal indicators accounted for 88% of the annual index, 105,600, according to the principle of integer distribution, 17600 per period; unit indicators accounted for 6% of the annual index, 7200, according to the principle of integer distribution, 1200 per period; The operating vehicle indicators accounted for 6% of the annual target, which was 7,200, which were configured in accordance with relevant regulations.
Based on this calculation, at least 23,799 indicators will be allocated for each round of car purchases this year.
Airless Spray Gun
This process occurs when paint is applied to an object through the use of an air-pressurized Spray Gun. The Sprayer Gun has a nozzle, paint basin, and air compressor. When the trigger is pressed the paint mixes with the compressed air stream and is released in a fine spray.
Types of nozzles and sprays
Due to a wide range of nozzle shapes and sizes, the consistency of the paint can be varied. The shape of the workpiece and the desired paint consistency and pattern are important factors when choosing a nozzle. The three most common nozzles are the full cone, hollow cone, and flat stream.There are two types of air-gun spraying processes. In a manual operation method the air-gun sprayer is held by a skilled operator, about 6 to 10 inches (15–25 cm) from the object, and moved back and forth over the surface, each stroke overlapping the previous to ensure a continuous coat.In an automatic process the gun head is attached to a mounting block and delivers the stream of paint from that position. The object being painted is usually placed on rollers or a turntable to ensure overall equal coverage of all sides.
Airless Spray Gun
Airless Spray Gun,Airless Paint Spray Gun,Paint Spray Gun,Spray Gun
Fuzhou HVBAN Mechanical Equipment Co., Ltd. , http://www.hi-sprayer.com