Analysing how hybrid equipment can extend its service life To enhance the working quality of hybrid equipment and maintain its longer life, attention must be paid to the following aspects:
1. Equipment for mixing equipment: First, the mixer should be placed on a smooth carrier. In short, the mixer must be placed in a stable manner, and then the feet of the mixer should be installed, and then it should be leveled so that the mixer can be free. The operation will be fine.
2. Before using the mixing equipment, it is best to add oil to the place where you need to refuel, and then carry out the no-load operation to check if there are loose fasteners, whether the electrical work is normal and to determine the normal operation of the mixer. In addition, if any abnormal conditions of the mixer are noticed during the operation, remember that the mixer must be checked for shutdown.
3, the mixing equipment feeding port to the above and then feeding work, remember that the amount of feed it is best to perform the relevant operations according to the specified capacity, after the feed cap is tightly closed, and finally start the mixer to work in the mixer Be careful when working. If there is something wrong with the mixer, remember to check it out.
4. The replacement of the mixer can only be performed when the inside and outside of the hopper of the mixer are rinsed clean.
5, if it is a regular use of the mixer, it is best to change the oil once every three months, in addition, when mixed, remember to clean it and then change the oil.
6. For those electrical control parts to be kept clean and high quality work, if you find a fault to be resolved in time.
7. After the end of each work, it is necessary to clean the remaining materials in all parts of the mixer. After a long period of shutdown, the entire mixer must be wiped clean. The surfaces of the parts should be coated with antirust oil and covered with a tarpaulin.
1. Equipment for mixing equipment: First, the mixer should be placed on a smooth carrier. In short, the mixer must be placed in a stable manner, and then the feet of the mixer should be installed, and then it should be leveled so that the mixer can be free. The operation will be fine.
2. Before using the mixing equipment, it is best to add oil to the place where you need to refuel, and then carry out the no-load operation to check if there are loose fasteners, whether the electrical work is normal and to determine the normal operation of the mixer. In addition, if any abnormal conditions of the mixer are noticed during the operation, remember that the mixer must be checked for shutdown.
3, the mixing equipment feeding port to the above and then feeding work, remember that the amount of feed it is best to perform the relevant operations according to the specified capacity, after the feed cap is tightly closed, and finally start the mixer to work in the mixer Be careful when working. If there is something wrong with the mixer, remember to check it out.
4. The replacement of the mixer can only be performed when the inside and outside of the hopper of the mixer are rinsed clean.
5, if it is a regular use of the mixer, it is best to change the oil once every three months, in addition, when mixed, remember to clean it and then change the oil.
6. For those electrical control parts to be kept clean and high quality work, if you find a fault to be resolved in time.
7. After the end of each work, it is necessary to clean the remaining materials in all parts of the mixer. After a long period of shutdown, the entire mixer must be wiped clean. The surfaces of the parts should be coated with antirust oil and covered with a tarpaulin.
Agricultural Drip,Drip Irrigation Tape,Drip Tape Machine
Deke Plastics Machinery Co., Ltd. , http://www.china-plastic-granulator.com