1. purpose
The purpose of this regulation is to standardize the operation of electric instrument repairmen so as to avoid personal injury accidents.
2. Scope of application
Applicable to workshops or workplaces that have electric instrument repairman jobs.
3. Operating procedures
3.1 Electrical instrument repairman safety operating procedures
3.1.1 On electrified switchboards, when assembling and disassembling and on-site repairing electrical instruments, there shall be no less than two persons. Work shall be marked or separated from the live working equipment by marked marks during the work.
3.1.2 The power supply circuit for assembly and disassembly and on-site repair and calibration instruments must be powered off. Do not disassemble or attach live instrument lines.
3.1.3 When repairing or verifying an electrical instrument, it is necessary to be familiar with the requirements of the process and the specifications and the electrical circuit conditions on the site, and to formulate practical and practical measures to prevent electric shock.
3.1.4 When electrified, it is necessary to strictly observe the relevant operating procedures and site procedures. After the work is completed, it must be restored to its correct and intact operating state.
3.1.5 The electrical instrument must be handled with care in the process of installation, repair, maintenance and transportation to ensure that the whole is intact.
3.1.6 The use of standard instrumentation, calibration station devices, must strictly abide by the terms of the instruction manual, regular maintenance, to ensure good performance.
3.1.7 Proper storage When carrying the instrument to be installed, the integrity, accuracy, and safety of all operating instruments should be ensured.
The purpose of this regulation is to standardize the operation of electric instrument repairmen so as to avoid personal injury accidents.
2. Scope of application
Applicable to workshops or workplaces that have electric instrument repairman jobs.
3. Operating procedures
3.1 Electrical instrument repairman safety operating procedures
3.1.1 On electrified switchboards, when assembling and disassembling and on-site repairing electrical instruments, there shall be no less than two persons. Work shall be marked or separated from the live working equipment by marked marks during the work.
3.1.2 The power supply circuit for assembly and disassembly and on-site repair and calibration instruments must be powered off. Do not disassemble or attach live instrument lines.
3.1.3 When repairing or verifying an electrical instrument, it is necessary to be familiar with the requirements of the process and the specifications and the electrical circuit conditions on the site, and to formulate practical and practical measures to prevent electric shock.
3.1.4 When electrified, it is necessary to strictly observe the relevant operating procedures and site procedures. After the work is completed, it must be restored to its correct and intact operating state.
3.1.5 The electrical instrument must be handled with care in the process of installation, repair, maintenance and transportation to ensure that the whole is intact.
3.1.6 The use of standard instrumentation, calibration station devices, must strictly abide by the terms of the instruction manual, regular maintenance, to ensure good performance.
3.1.7 Proper storage When carrying the instrument to be installed, the integrity, accuracy, and safety of all operating instruments should be ensured.
Ultrasonic Surgical Gown Sealing Machine
Ultrasonic Machines Sealing,Non Woven Ultrasonic Sealing,Disposable Surgical Gown Sealing,Ultrasonic Surgical Gown Sealing Machine
Changzhou Tengjie Machinery Equipment Co., Ltd. , https://www.ultrasonictj.com