The China Automotive Industry Refueling Vehicles Catalog contains a list of China Ministry of Industry and Information Technology's refueling car cars. All 9 Categories 178 Manufacturers 154 Refuelling Vehicle Brands 4194 Refueller Product Information, Latest Refueling Vehicle Bulletin, Environmental Notice, Fuel Bulletin, Free Announcements, pictures, news, and the most timely refueling truck quote price information.
Catalog: Top loading configuration tanker special function Description Tanker maintenance product name: Auman top four rear eight refueling vehicle [1] Top loading configuration: The effective volume of the tank: 27 cubic meters, tank dimensions (length × width × height) (mm): 9200 × 2480 × 1750, transport medium: Gasoline, density: 700 kg / cubic meter. Optional flat top cab with chassis. Only SC8DK260Q3 and SC8DK240Q3 engines are used. Transport name: Gasoline, density 0.7 t/m3, tank effective volume: 26.25 m3, tank dimensions (length x long axis x minor axis) (mm): 9100 x 2460 x 1650. With the optional chassis cab. Side guards are cold-formed steel/Q235-A, welded and bolted. After the protection of cold-formed steel / Q235-A, welded connection. The height of the rear protective section is 100mm, the width of the section is 50mm, and the height of the lower edge is 540mm. Refuelling device model and manufacturer: 80YHCB-60/ Shandong Boshan Qilu Oil Pump Factory.
Catalog: Top loading configuration tanker special function Description Tanker maintenance product name: Auman top four rear eight refueling vehicle [1] Top loading configuration: The effective volume of the tank: 27 cubic meters, tank dimensions (length × width × height) (mm): 9200 × 2480 × 1750, transport medium: Gasoline, density: 700 kg / cubic meter. Optional flat top cab with chassis. Only SC8DK260Q3 and SC8DK240Q3 engines are used. Transport name: Gasoline, density 0.7 t/m3, tank effective volume: 26.25 m3, tank dimensions (length x long axis x minor axis) (mm): 9100 x 2460 x 1650. With the optional chassis cab. Side guards are cold-formed steel/Q235-A, welded and bolted. After the protection of cold-formed steel / Q235-A, welded connection. The height of the rear protective section is 100mm, the width of the section is 50mm, and the height of the lower edge is 540mm. Refuelling device model and manufacturer: 80YHCB-60/ Shandong Boshan Qilu Oil Pump Factory.
Tanker special function description: Tanker special function description: ★ The company's modified tanker trucks are all modified using the domestic mature original chassis. Users can also bring their own chassis. Our factory provides the production modification of the top parts. ★ Tank Material: Carbon Steel, Stainless Steel, Steel Lining, FRP, Plastic Tank (Polyethylene) ★ Can type: square round, oval, round ★ Oil pump: self-priming pump, gear pump, chemical pump, stainless steel pump ★ Oil meter: single counting, double counting, tax-controlled fueling machine ★ Function: It can separate warehouses, and can be divided into different oil products, chemical products and foods. Designed to achieve pumping, pumping out of the table, the pump into the pump but the table, self-flow over the table, but the table and other functions. ★ Tankers can be designed as chemical vehicles. ★ Tankers can be equipped with computer refueling machines. ★ Tanker trucks have a wide range of customer tonnage options to meet customer needs. ★ Multiple anti-wave partitions are installed in the tank body. The use of high-pressure gas leak detection, so that the tank has high strength, stable center of gravity, vehicle safety and stability. Tanker maintenance: 1. Clean the air filter and add engine oil. Clean the oil filter, oil filter, and fuel filter. 2. Clean the dirt and dust on the outer surface of the battery and the electrode column, and unscrew the ventilation holes on the cover. At the same time, check the specific gravity of the electrolyte in the battery, the height of the liquid surface, and tighten the wire connectors. 3. Remove the buildup on the distributor and ignition coil, check and adjust the clearance of the breaker contacts, and lubricate the distributor shaft. 4. Remove the carbon deposit on the spark plug and check and adjust the electrode gap. 5. Remove dirt from carbon brushes and commutators on the generator and starter. Check the starter switch status. Lubricate the generator's bearings. 6. Check the tightness of the fan belt. 7. Inspect all high-voltage conductors and low-voltage conductors for looseness, damage, or poor insulation, and wipe grease and dust from the conductors. 8. Check whether the fuel pump of the carburetor is installed securely, and whether the throttle and choke valves and the throttle pedal operating mechanism are flexible and normal, and adjust the idle speed. 9. Inspect each fitting for leaks and tighten. 10. Check for loose or leaking radiators, pumps, and water pipes. Also check the function of the shutters, radiator caps and their valves. 11. Check and tighten the steering gear. Check the play of the steering wheel. Check and adjust front wheel hub bearing tightness and toe. 12. Check and adjust the free travel of clutch pedal and brake pedal. 13. Check the condition and tightening of the leaf spring. Lubricated leaf spring pin. 14. Inspect the engine, transmission, rear axle, steering gear, etc. for leaks, and check for sufficient oil and gear oil. 15. Check that the hand brake and foot brake and their operating mechanism are tight and working properly. Check and adjust the brake shoe clearance. Check and fill brake master cylinder brake fluid. 16. Inspect and tighten the connections of the drive shaft, universal joints, and intermediate drive shaft bearings. 17. Check that the tire pressure is within the specification and check the condition of the tread. 18. Check that the fastening bolts and nuts of each part are loose and tighten. 19. Release scale and water from the fuel tank. 20. Start the engine and listen for noise or noise in the engine during idling, medium and high speed operation. Observe oil leakage, water leakage, leakage, and leakage at the oil supply system, lubrication system, cooling system, and electrical system. . 21. Lubricate.
Typically any forklift from 1500-5500 lbs. will have Class 2 forks. 6000-11,000 lbs capacity lifts will be Class 3. 11,500-17,500 lbs capacity forklifts will be Class 4. After that, most forklifts use a shaft mount or propriety mount.
4000-Pound Capacity Clamp-on Pallet Forks for Tractor/Loader, Skid Steer Bucket | Pair. Attachments
The pallet fork is a component of the lever escapement of a mechanical watch. The pallet forkand the lever form one component that sits between the escape wheel and the balance wheel.
Pallet Forks For Tractors. Moving pallets with your tractor is a task that makes sense for millions of tractor owners,
contact Sara- Genenal manager
email:forkliftfork@hotmail.com
phone/whatsapp/wechat:8613863419726
Pallet Fork,Shaft Forks,Cargo Fork,20 Ton Forklift Forks
Shandong Techence Forging Co.,Ltd , https://www.shandongtechence.com