Ability to shift the shaft to automatically unload the semi-trailer plate type wrecker

Card riders who often enter and exit the city should have seen flatbed wreckers. One of the characteristics of this wrecker is that the tablet can be lifted and tilted at a certain angle, and the rear edge of the tablet can be brought into contact with the ground while the tablet is in front of the tablet. There is also a winch, which can pull the transported vehicle directly onto the flatbed and carry it back.

Ability to shift the shaft to automatically unload the semi-trailer plate type wrecker

Usually these wreckers are modified with light truck chassis to transport small cars such as cars. If it is said that the delivery of large cars or construction machinery, in addition to using a large wrecker to lift traction, and then may be the use of ordinary flat car or pallet car transported.

However, Americans who have always had a small brain hole have actually created a semi-trailer similar to the structure and function of a flat wrecker! Like the flatbed wrecker, it lifts the tilt plate and has a winch.

Ability to shift the shaft to automatically unload the semi-trailer plate type wrecker

However, unlike the flat wrecker, the flat wrecker has a slide below the pallet that allows the flatbed to move backwards. This semi-trailer is to make the trailer axle move, and has the same effect.

Mono Screw Pump

mono Screw Pump aslo beed called single screw pump. pump beed usde to transfer sludge, mud and sauce etc thick liquid. the general mono screw pump is be used to transfer sludge, mud etc thick liquid. it's have large flow rate and high pressure. stainless steel material mono screw pump can be used to transfer tomato sauce, bolognese, sesame sauce etc, pump also can with the hopper and reamer. all according customer's requirment. single screw pump belongs to the rotor type positive displacement pump, it is depend on the screw meshing with liner on the discharge and suction cavity to conveying liquid volume change.It is a kind of method of pressurized screw pump, a main working parts by bushing has a double helix cavity (stator) and the stator cavity and its meshing single-head screw screw (rotor).When the input shaft through the universal joint drive making planets revolving around the center of the stator, rotor stator, rotor, vice is continuous mesh form sealed cavity, the seal chamber volume invariably uniform axial movement, the medium from the suction end of deputy to the stator, rotor pressure side, the suction medium sealed cavity through the stator without stirring and destruction.

Mono Screw Pump,Industrial Screw Pump,Sludge Screw Pump,Mono Single Screw Pump

Botou Honghai Pump Co.,Ltd , https://www.pumphonghai.com