SF6 gas decomposition analyzer main features and technical indicators
SF6 Gas Decomposition Analyzer is the first in China and has obtained national patents. The instrument is based on infrared technology. It is equipped with precision sensors such as mass flow sensor, ambient humidity sensor and humidity sensor. It also uses the most popular and advanced Embedded technology makes sampling data faster, more realistic, and more reliable. The instrument uses a liquid crystal display, the interface is friendly and beautiful, and easy to operate. Main applications: fault location, routine inspection, partial discharge monitoring, gas purification/filter monitoring, faulty high voltage contact inspection, SF6 decomposition product detection, and inspection of the generation of decomposition products in the switch.
â– Main features
1, long-life detection components
2, no colorimetric tube, sensor measurement
3, high precision, good repeatability
4, built-in stability valve and electronic mass flow meter
5, large color LCD display
6, rechargeable battery power supply, AC and DC
7, fast response, almost no warm-up waiting
8, the measurement result is not affected by the ambient temperature â– technical parameters
1. Gas mass range: SO2: 0-1000 μL/L, H2S: 0-1000 μL/L CO: 0-1000 μL/L
2. Sensitivity: SO2: ±0.1μL/L H2S: ±0.1μL/L CO: ±0.1μL/L
3, sampling: built-in stability valve, filter, flow meter; 3.6 meters sampling tube and connector set
4, working temperature: -40 °C ~ 50 °C
5, working power: 220VAC ± 10% 50Hz, AC and DC dual-use; overcharge protection, continuous work of not less than 10 hours.
6, read out: large color LCD graphic display
7, sampling flow: 0.01 ~ 1L/min
TORICH is specialized manufacturer and supplier of DOM STEEL TUBE, DOM STEEL TUBING,DOM Tubing, DOM STEEL PIPE.
DOM Steel Tubes, are produced with Cold Drawn Process based on ERW Steel Tubes, to achieve Good outside and inside surface,
the advantage of the production is better Concentricity and Ovality, to reduce deviation of Roundness of the steel tubes.
DOM Steel Tubing is also called Welded Cold Drawn Precision Steel Tubes.
Technical Standard:
ASTM A513 Type5, Type 6, SSID
EN10305-2
SAE J525
Products Application:
Oil Cylinders
Air Cylinder,
Automotive Cylinder Liners
Jack Lifting
Telescopic Systems
Pneumatic Cylinders
Gas Spring Cylinders
Race Car Frames
Roll Cages
Motorcycle Frames
Spindles
Rollers
Shafts
Bushings
Clinders, Bore Cylinders
Size range is:
O.D. 4-350mm,
W.T. 0.5-30mm,
Length: according to customer`s requirement and agreement
DOM Round Steel Tube, is a ERW welded mechanical round steel tube with the internal weld seam removed achieving a smooth internal surface.
DOM round steel tube has been drawn over a mandrel and die to produce a tube having more accurate dimensional tolerances, and a very smooth inside and outside finish. DOM round steel tube is ideal for more stressful applications requiring higher quality, increased mechanical properties, uniformity, strength, and soundness.
Dom Tube,Seamless Welded Pipes,Thin Wall Steel Tube,Drawn Over Mandrel Steel Tube
TORICH INTERNATIONAL LIMITED , https://www.steeltubepipechina.com