·The highest proportion of mid-to-high-end models in domestic car recalls in April

According to the latest information released by the General Administration of Quality Supervision, Inspection and Quarantine, there were 12 multinational automobile brands last month, and a recall notice involving multiple models was issued in China.
The related car brands are Subaru, Volkswagen, Porsche, BMW, Jaguar, Kia, Lexus, Toyota, Nissan, Fiat, Infiniti, Peugeot, and the number of cars involved is 642,454. In terms of quantity, the total number of recalls this month has nearly doubled compared with the 321,860 vehicles in March last year. Judging from the grades of the models, the vehicles recalled in April this year are mainly mid-to-high-end and luxury car brands, and there are no independent brands on the list.
Although as usual, the problems that occurred in the models that were recalled last month were varied, but the recalls of the three models, the Kia Sorento, the Volkswagen Touareg and the Porsche Cayenne, were “inside”. In March of this year, the AQSIQ issued a risk warning notice for the safety hazards of the three models. The recall of the three models last month was also a positive response to the notice issued by the AQSIQ.
In addition, the General Administration of Quality Supervision, Inspection and Quarantine also issued a recall notice related to automobile tires on April 29; the announcement pointed out that part of the K speed produced by Wuhan Oles Tire Co., Ltd. from February 2014 to October 2014 Grade light duty bias tires, because their speed grade should be E (70km / h), but was mistakenly identified as K (110km / h); for this purpose, the company will recall all relevant tires and change the logo for free, To eliminate security risks.
　 April domestic car recall list Subaru Legacy, Outback, Forester
From April 22, 2016, Subaru Motors (China) Co., Ltd. recalled some of the imported 2016 Leroy cars produced between September 11, 2015 and October 20, 2015, April 16, 2015 to 2015. Part of the imported 2016 Aohu Motors produced during the period of October 12, and some imported 2015 Forester cars produced between June 30, 2015 and October 16, 2015. According to the company's statistics, there are 78 vehicles involved in mainland China.
Published: April 1, 2016
Reason for recall: The plastic molded parts at the front end of the intake manifold of the turbocharged engine supercharger of this recalled vehicle were produced with the wrong materials due to improper production management of the parts manufacturer, resulting in the installation of the supercharger. In the process of using the intake manifold, the plastic molded parts may be cracked due to oil resistance and heat resistance, and may cause cracking of the idle speed and low power output of the vehicle. In severe cases, it may cause The engine is off. The company will conduct a free inspection of the recalled vehicle, check the production number of the intake manifold, and replace the new supercharger intake manifold for vehicles with plastic molded parts produced with the wrong materials.
　　 Volkswagen Touareg
From April 18, 2016, Volkswagen (China) Sales Co., Ltd. recalled some imported Touareg series cars from January 12, 2010 to January 19, 2016. According to the company's statistics, 103,569 vehicles are involved in mainland China.
Published: April 5, 2016
Reason for recall: The circlip on the brake pedal hinge of the vehicle within this recall may be loose. If the circlip is released, the pedal pivot pin may shift, causing the pedal to deviate from the working trajectory, and continued use of the vehicle may cause the pedal shaft to break. In some cases, the driver may not be able to effectively brake with a loose pedal or even cause an accident. The company will commission an authorized dealer to check the circlip on the pedal bearing for the vehicle within the recall for free and to ensure that it is normal. A new circlip will be installed for the vehicle if necessary.
Porsche Cayenne
From April 18, 2016, Porsche (China) Automobile Sales Co., Ltd. recalled some imported Cayenne series cars from March 26, 2010 to January 11, 2016. According to the company's statistics, there are 108,910 vehicles in mainland China.
Published: April 5, 2016
Reason for recall: The main reason and treatment method are the same as the recall of the above Volkswagen Touareg.
　 BMW 7 Series
From May 25, 2016, BMW (China) Automobile Trading Co., Ltd. recalled some imported 7 Series cars, which were produced from June 24, 2015 to December 11, 2015. According to the company's statistics, 3,115 vehicles are involved in mainland China.
Published: April 8, 2016
Reason for recall: Vehicles within the scope of this recall may have small metal pieces cut during the stamping process due to defects in the manufacturing process of the supplier. In some cases, the metal sheet may move and cause a short circuit in the internal circuitry of the control unit. At this point, the airbag control unit will enter a short restart process, during which the airbag control unit will not work and the vehicle's airbag warning light will illuminate. This situation increases the likelihood that a vehicle occupant will be injured in a collision that requires airbag deployment. The company will replace the new airbag control unit with a free one for the vehicle within the scope of the recall.
Jaguar XJ and XF
From July 1, 2016, Jaguar Land Rover Auto Trading (Shanghai) Co., Ltd. recalled some imported Jaguar XJ and XF series cars from March 29, 2012 to October 6, 2015. According to the company's statistics, there are 36,145 vehicles in mainland China.
Published: April 8, 2016
Reason for recall: Because the Jaguar Land Rover factory has made the idler wheel of different engine configurations, the paint is processed on the dust cover of the engine idler of the vehicle within the recall range, but this measure may reduce the clamping force of the connecting piece. The bolt is subjected to force to cause fatigue fracture. This causes the idler to fail to fix, thereby separating the idler from the engine. The consumer may notice that the battery charging fault warning light on the combination meter is lit, the air conditioning fault prompts, and the engine overheating fault indication due to the loss of power of the coolant pump. In addition, consumers may also notice a fault indicator light (MIL) display on the instrument cluster, accompanied by a reduction in steering assist, which in some cases increases the risk of vehicle collision. The company will replace and fix the idler assembly that has not been painted with dust cover for vehicles within the recall range.
　 Kia Sorento
From April 8, 2016, Hyundai Motor (China) Investment Co., Ltd. Shanghai Branch recalled some imported Kia Sorento cars from January 10, 2010 to March 6, 2013. According to the company's statistics, 8549 vehicles are involved in mainland China.
Published: April 8, 2016
Reason for recall: When the vehicles in this recall range use low-lubricity diesel oil (lubricity index exceeds the standard fuel), the high-pressure pump drive unit wears out and the common rail pressure is insufficient. This problem occurs during driving, which will cause the output power to drop and the warning light to be on. If you continue driving, it may lead to flameout. The company will replace the new high-pressure pump for free in accordance with the maintenance procedures for vehicles within the scope of the recall.
　 Subaru Outback
From April 13, 2016, Subaru Auto (China) Co., Ltd. recalled some of the Subaru's 2015 Outback cars that were produced from October 3, 2014 to August 31, 2015. According to the company's statistics, a total of 14,802 vehicles are involved in mainland China.
Published: April 8, 2016
Reason for recall: In the VDC (vehicle dynamic control system) control unit of this recalled vehicle, due to improper programming of the brake control program of the electronic parking, when the vehicle is parked, the electronic parking brake is turned on and turned off after a specific The vehicle ignition switch is activated again in an instant, and the brake motor of the electronic parking will continue to work, and damage will occur due to overheating, resulting in the electronic parking brake not being released, and the vehicle cannot be used normally. The company will upgrade the electronic parking brake control program of the VDC control unit for this recalled vehicle for free.
　　 Lexus ES200, ES250, RX200t
From April 15, 2016, Toyota Motor (China) Investment Co., Ltd. recalled some imported LEXUS ES200, ES250 and RX200t vehicles from September 1, 2015 to February 26, 2016. According to the company's statistics, a total of 15,322 vehicles were involved in mainland China.
Published: April 14, 2016
Reason for recall: The brake actuator of this recalled vehicle may not be able to provide the oil pressure required for the work such as the anti-lock braking system (ABS) and the vehicle stability control system (VSC) due to the manufacturing reasons of the specific supplier. It may affect the stability of the vehicle. The company will confirm the product serial number of all target vehicle brake actuators and replace the problematic brake actuators free of charge.
　　 Toyota Crown
Since May 20, 2016, Tianjin FAW Toyota Motor Co., Ltd. recalled the 2009-2010 Crown 4.3LRoyalSaloon VIP car produced between December 1, 2009 and December 20, 2010, for a total of 127 vehicles.
Published: April 18, 2016
Reason for recall: The vehicle in this recall has not set a protection circuit due to the speaker drive component installed near the cooling opening in the audio power amplifier. If foreign matter is mixed in, the component may be short-circuited, causing the audio amplifier substrate to burn. In severe cases, it may cause a fire. The company will replace the improved audio amplifier for all target vehicles for free.
　　 Nissan Qijun, NV200
Since August 10, 2016, Dongfeng Motor Co., Ltd. and Zhengzhou Nissan Automobile Co., Ltd. recalled the following vehicles, totaling 266,637 vehicles. (1) Some of the 2014/2015 Chijun vehicles produced by Dongfeng Motor Co., Ltd. from September 2, 2013 to October 22, 2015, totaling 181,958 vehicles; (2) Zhengzhou Nissan Automobile Co., Ltd. April 26, 2010 Some of the 2010-2015 NV200 vehicles produced during the period of October 26, 2015, totaled 84,479.
Published: April 18, 2016
Reason for recall: After the long-term use of the pneumatic struts of the back door of some vehicles in this recall range, the joint may be rusted. In extreme cases, the outer cylinder of the pneumatic strut is corroded and damaged, which may cause the pneumatic strut to escape. The above companies will replace the new back door pneumatic strut free of charge for vehicles within the recall range.
　　 Fiat Philippine
From April 25, 2016, GAC Fiat Chrysler Automobile Co., Ltd. recalled some of the imported Fiat Filip vehicles from 2012 to 2014 during the period from March 5, 2012 to April 25, 2014. According to the company's statistics, there are 2,990 vehicles in mainland China.
Published: April 22, 2016
Reasons for recall: Some vehicles within the scope of this recall will have moisture entering the ABS anti-lock braking system module under certain circumstances, which may lead to failure and failure of the ABS anti-lock braking system and the ESC electronic stability control system. Increase driving risk. The company will seal the ground wire of the ABS anti-lock brake system module of the above-mentioned affected vehicle, seal the wiring harness with double-layer heat-shrinkable tube, replace the headlights and instrument panel harness as needed, and replace if necessary. ABS anti-lock brake system module.
　　 Infiniti Q50L, QX50, QX60, Q50
Since September 20, 2016, Dongfeng Motor Co., Ltd. and Nissan (China) Investment Co., Ltd. will recall the following vehicles, a total of 57,648 vehicles. (1) Part of the 2014-2015 domestic Infiniti Q50L vehicles produced from October 16, 2014 to April 20, 2016, totaling 25,627 vehicles; (2) Production from December 27, 2014 to April 20, 2016 Part of the 2014-2015 domestic Infiniti QX50 car, a total of 11059; (3) part of the 2014-2015 imported Infiniti QX60 car produced during the period from November 13, 2013 to April 15, 2016, a total of 12,373; (4) Some of the imported Infiniti Q50 vehicles, which were produced during the period from February 6, 2014 to April 20, 2016, totaled 8,589 vehicles.
Published: April 29, 2016
Reason for recall: Due to procedural problems in the passenger classification system control unit during the recall, adults may be mistakenly sentenced to children when they are seated in the passenger seat, causing the warning light to illuminate. In rare cases, it may be The system misjudged the empty seat. When the vehicle is subjected to a collision sufficient to open the airbag, the passenger airbag sometimes does not open, causing the occupant to be injured. The above companies will replace the improved passenger classification system control unit for all subject vehicles free of charge.
　　 Peugeot 408, 308S
Since May 16, 2016, Shenlong Automobile Co., Ltd. recalled some Dongfeng Peugeot 408 and 308S sedan produced between November 18, 2014 and March 18, 2015, totaling 24,562 vehicles.
Published: April 29, 2016
Reason for recall: For the vehicles within the scope of this recall, due to the manufacturer's manufacturing reasons, the quality of the bolts on the front brackets of some vehicles' triangle arms does not meet the requirements. In extreme cases, the triangular arm front bracket fastening bolts may break. Since May 4, 2015, the company has recalled 19,481 Dongfeng Peugeot 408 sedan produced from February 22, 2014 to November 20, 2014 due to the same defects. Due to product traceability, the company decided to expand the scope of the recall and replace the qualified triangular arm front bracket fastening bolts for the affected cars for free.

Food Waste Pyrolysis Plant

Food waste is one of the most important garbage, including the production of food processing waste, family and school canteens and catering industries (kitchen) and edible residual (hogwash). Its main components are complex, is a mixture of oil, water, fruit peel, vegetables, rice, fish, meat, bones and waste plastics, tissues and etc.

China has a huge quantity of food waste, and increasing rapidly.

According to different application range and the actual situation, Shangqiu jinpeng industrial CO., Ltd manufacture Continuous Pyrolysis Plant to solve food waste issues. By this method, we can put off the kitchen garbage treatment thoroughly, make it into fuel oil, carbon black, sync gas(could use as fuel for Continuous Pyrolysis plant).

Flow-chat of continuous pyrolysis plant

Advantage of continuous pyrolysis plant

1. Large daily capacity of 30 MT raw materials, and can work 24 hours without any stop for 20 days;

2. Auto-loading, auto-discharging and oil coming out at the same time;

3. Only need fuel for the beginning 3-4 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;

4. Low requirement on the raw materials, no need tiny granule, 10cm pieces acceptable for smooth running;

5. High efficiency condensers, more oil output, good quality oil, easy to clean.

6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.

7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.

8. Easy to operate, need less manpower.

Technical Parameter of continuous pyrolysis plant

Food Waste Pyrolysis Plant

Food waste is one of the most important garbage, including the production of food processing waste, family and school canteens and catering industries (kitchen) and edible residual (hogwash). Its main components are complex, is a mixture of oil, water, fruit peel, vegetables, rice, fish, meat, bones and waste plastics, tissues and etc.

China has a huge quantity of food waste, and increasing rapidly.

According to different application range and the actual situation, Shangqiu jinpeng industrial CO., Ltd manufacture continuous pyrolysis plant to solve food waste issues. By this method, we can put off the kitchen garbage treatment thoroughly, make it into fuel oil, carbon black, sync gas(could use as fuel for continuous pyrolysis plant).
  

Flow-chat of continuous pyrolysis plant   

Advantage of continuous pyrolysis plant

1. Large daily capacity of 30 MT raw materials, and can work 24 hours without any stop for 20 days;

2. Auto-loading, auto-discharging and oil coming out at the same time;

3. Only need fuel for the beginning 3-4 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;

4. Low requirement on the raw materials, no need tiny granule, 10cm pieces acceptable for smooth running;

5. High efficiency condensers, more oil output, good quality oil, easy to clean.

6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.

7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.

8. Easy to operate, need less manpower.

Technical Parameter of continuous pyrolysis plant

Food Waste Treatment Equipment

Food Waste Treatment Equipment,Kitchen Waste Processing,Food Waste Treatment

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl