Model NO.: GDW-50 & GDW-50Z
Control: Computer Control
Weight: >2000Kg
Power Source: AC380V
Oil Cylinder Position: Top
Trademark: SHENLI
Transport Package: Wooden Case with Fumigation Certificate
Specification: Can be customized
Origin: Shanghai, China
HS Code: 90241090
Â
1.  Performance Characteristics:
l Perfect suitable for metal pipe, welded steel pipe, seamless steel pipe, FRP and other material flatting test.
l Four-column frame structure with superior rigidity and compact structure
l By using the high-speed bi-directional hydraulic cylinder which has a wide range of stroke adjustment makes test more efficient.
l The hydraulic system uses pressure servo technology and thus more energy efficiency.
l GDW series is an economical choice for you to doing flatting tests. You can observe the scale plate which attached between upper and lower platen to measure the deformation. When the deformation of specimen reaches your requirement, you can stop the test by operating the testing machine.
l Otherwise, GDW-Z series is an intelligent choice for you. You can start or end the test by operating the computer. When the deformation of specimen reaches the value you have set in the software, the testing machine will automatically stop. And it can simultaneously display test data and draw the test curves.
 Â
2.  Applications:
l Metal pipe, welded steel pipe, seamless steel pipe
l FRPÂ
3. Â Â Basic Testing Operating:
3.1Â GDW Series Ring Stiffness Testing machine
i.         Put the pipe specimen on the under plate.
ii.         Operate the testing machine to begin the test. You can observe the scale plate which attached between upper and lower platen to measure the deformation.
iii.         When the scale plate reading reaches the deformation you require, then you manually stop the test.
Â
3.2Â GDW-Z Series Computer Controlled Ring Stiffness Testing MachineÂ
i.         Put the pipe specimen on the under plate.
ii.         Enter the specimen size (like pipe OD, wall thickness and etc.) into software, set the value of deformation of specimen you require in the software and then click begin.
iii.         The testing machine starts automatically. The software can simultaneously display test data and draw the test curves. You can also adjust the test speed by computer.
iv.         When the deformation of specimen reaches the value you have set, the testing machine will automatically stop.
v.         After the flatting test has done, the upper plate will return to the initial position and wait for another flatting test.Â
| Main Specification | GDW-50 | GDW-50Z |
| Capacity | 50kN | |
| Accuracy of Deformation | / | 0.50% |
| Distance Between upper and lower Compression Plates | 5-180mm | |
| Flattening Platens Width | 300mm | |
| Distance Between Columns | 293mm | |
| Piston Stroke | 180mm | |
| Max. Testing Speed | 90mm/min | 150mm/min |
| Pipe Surface | Uncoated and not marked | |
| Pipe Temperature | Ambient | |
| Machine Type | Hydraulically operated press | |
| Dimension of Load Frame | 800mm*500mm*1500mm | |
| Power Supply | AC 380V 50Hz 3-phase | |
Â
Bison Machinery Co., Ltd , http://www.zjengine.com