When the summer arrives, the temperature of the vehicle's engine will be too high, but in most cases, many people will easily ignore it and feel that this is not a big problem. In fact, if the engine's heating phenomenon is not properly checked and dealt with, it may cause various engine failure problems. The following is a brief introduction of some methods and techniques for checking and handling the overheated engine of the feed truck.
1. Look at the status of the temperature indicator light. If it is found that the temperature warning lights in the car are continuously blinking, it means that the temperature of the starting system is already very high. The owner should immediately stop the car and carefully check the cooling system on the car. If no abnormalities are found during the inspection, the cooling water in the cooling system can be added after it is completed. However, if it is found that the system is faulty during inspection, it must be promptly sent to the nearest repair shop for repair.
2, touch the water pipe, feel the temperature difference between the upper and lower water pipes. If no problem is found during the inspection of the cooling system, you can use water to gently touch the upper and lower water pipes to feel the temperature of both. If the temperature difference between the two is too large, then there is a problem with the thermostat and it will not be able to cool down. At this time, you can buy replacement parts of the same specifications.
3, check the heat sink heat dissipation. Because the chassis of this type of feed carrier is exposed to the outside for a long period of time, the vehicle will run under a road with poor road conditions for a long time, and a thick layer of dirt will accumulate on the radiator, making the performance of the radiator. Was severely affected. Therefore, if you find that there is too much dust after the radiator is dirty, flush the radiator in time and let the radiator clean again.
The above is the inspection and treatment of abnormal engine fever in the summer of this vehicle, and it is hoped that it will be helpful for those owners who often need to use the vehicle.
Scaffolds are widely used on site to get access to heights and areas that would be otherwise hard to get to. Unsafe scaffolding has the potential to result in death or serious injury. Scaffolding is also used in adapted forms for formwork and shoring, grandstand seating, concert stages, access/viewing towers, exhibition stands, ski ramps, half pipes and art projects.
Ning Ruican Products supplies the Scaffolding Parts for the Building Products and Non Mechanical Plant to the construction industry.
Our products range from Gasket Nut,Combination Nut,Nut,Prop Nut,Adjustable Base Nut,Water Stop Nut,Plate,Cone,Pin,Hex Nut,Rapid Clamp,Template Folder,Gasket and other Templates Accessories,road forms, builders trestles, scaffold boards, scaffold towers and scaffolding components.
We have some stocks of many of our products and can satisfy bulk orders for many products with fast delivery times.
Ningbo Ruican is OEM factory,can supply the parts to overseas directly from Ningbo port or Shanghai port.
We are innovative and constantly work on developing new products and reducing costs by manufacturing more efficiently without effecting quality. These cost savings are passed on to our customers.
If you are interested in our products,pls don't hesitate to send your RFQ to us for quotation firstly.
Scaffolding Parts
Scaffolding Parts,Basic Scaffolding Parts,Heavy Duty Prop Nut,Anchor Scaffolding Nuts
Ningbo City Yinzhou Ruican Machinery Co.,Ltd , https://www.kstcasting.com