Chilled Milk Tank 5000L Milk Chilling Tank for Fresh Milk

 5T stainless steel chilling tank for farm milk 
(cooling fresh milk from 35 to 4degree , 2 hours time needed)

Supply & Installation of 500 Liter (Direct Expansion / Farm Milk Cooling Tank / Two Milking):
          √    Type  :    Direct Expansion type Milk Cooling Tank, (Two Milking).
          √    Model :     OM /DX 500 L, 2 T. Horizontal
           √    Milk/insulation vessel   :     2.0/0.9 mm thick Stainless steel AISI 304
           √   Evaporator  :  0.9/1.0 mm thick Stainless steel AISI 304
                                                      (Laser welded with milk vessel) 
          √  Test /Burst pressure of evaporator   :     36 / 64 Bar                                                                  
         √    Lid cover   :    1.5 mm thick Stainless Steel 304, mounted with 2 Nos springs, Milk pouring opening with plastic cover
        √  Compressor  :   Copeland (Make: USA)
        √  Insulation  :  Polyurethane foam insulation, 32-90 mm thick, 38-40 Kgs / M3 density. Environment friendly
                                                     We offer 50mm thickness , 40 kg/m3
         √  Electric/control panel     :       100% automatic/ digital type
        √  Legs  :  Legs Stainless Steel with Stainless Steel adjustable Bolts
        √  Milk agitation     :  S.S blade driven by slow speed Agitator, 30 RPM, Imported- Level switch
                                                    We offer 36rpm  agitator speed
        Milk Measuring   :  Calibrated Dip Stick provided with Milk Reading chart
        √  Butter Fly Valve at 
Milk outlet  :  Stainless Steel DN 50 with SMS thread and Milk stopper
        √  Milk thermometer :  Digital 
        √  Milk thermostat  :  Digital
        √  Refrigerant Control    :    Thermostatic Expansion Valve with MOP function - Danfoss. 
        √  Milk Temperature Controller :Digital from EU and incorporating time delay function for Compressor start up
 
COOLING UNIT : Mounted on the Tank, Designed for higher ambient -46 °C of following specs: 

1. Air Cooled Condenser √
2. Cover for Condensing Unit (Material for cover shall be SS)
3. Energy efficient statically / dynamically balanced fan motor assembly √
4. CFC free refrigerant. (R-404) √
5. Liquid receiver with valves is included in the cooling machine (with By-pass valve arrangement) √
6. 1.75 / 2 HP capacity - Hermetic Reciprocating compressor, 1 phase / 220 Volt - 50 hertz rating √
7. Contactor / overload relays from MG France/Equivalent √
8. Potential relay from EU / Equivalent. √
9. Starting capacitor from FUJI. √
10. LP/HP Switch, Filter driver and sight glass from Danfoss. √
11. Liquid line solenoid valve with timer arrangement. √
12. Under voltage/over voltage protection relay from EU/Equivalent. √

 
Payment:      within 30 days of after submission of invoice. √
 Warranty:-
Extended Warranty for the following parts of Milk Cooling Tank from the date of installation:
           a)   Evaporator against leakage :      60 months
            b)     Compressor :      24 months                                                         
           c) Condenser fan motor assembly :      12 months 
            d)     Agitator motor :      12 months 
            e)   Refrigerant leakage :      03 months
             f)     Milk Temperature controller (PLC Module)    :      12 months 
            We offer 12 months warranty fro all the parts of the milk cooling tank

Response Time to attend -    during warranty period.

1. Within 300 KM from Vendor's facility: 24-36 Hrs. of complaint received (Complaint to be logged in via email to vendor at least 2 hours before close of working hours).    √
2. Beyond 300 KM from Vendor's facility: 36 -48 Hrs. of complaint received (Complaint to be logged in via email to vendor at least 2 hours before close of working hours).    √ We offer timely service , we work 16hours every day, and  you can get timely warranty service in at most 16 hours. This why we can get more and more customers.

 
Technical specification for 5000Liter milk cooling tank

Dust Collector Fittings
The Dust Collector accessories include bag bag, skeleton (bag cage), electromagnetic pulse valve, pulse control instrument, star type ash relief valve, and other special accessories for Electrostatic Precipitator, such as anode plate, awn wire, Yin Yang pole vibrator, porcelain bottle, porcelain shaft and so on. It is suitable for accessories such as Bag Filter , Cyclone Dust Collector, wet dust collector, water film dust collector, electrostatic precipitator and other environmental protection dust removal equipment.
Summary
The dust collector is a kind of dust removal equipment, which is designed for the high humidity, low dew point and high dust concentration by using the integrated mechanism of the principle of inertia collision and the combination of electrostatic adsorption.
Principle of composition
Dust catcher accessories include dust bag, skeleton, electromagnetic pulse valve, pulse controller and other special accessories for dust catcher. The filtered flue gas must meet the national emission standard according to the design requirements of the dust collector; the operating resistance of the dust collector is generally kept below 150Pa; the working life of the filter material has reached more than 2 years, and the working life of the solenoid pulse valve of the dust cleaning system has reached 5 years and 100 thousand times.
Product features
The dust collector adopts the principle of combining the inertial separation and filter dust removal. It can handle the high concentration of the mixed air flow and can effectively separate the fine powder below 5um. It is an ideal substitute for the traditional cyclone separator. The dust collector parts should fully understand the features of the dust collector before use, so we need to be treated carefully. Now.
1. the operation is reliable and stable. The noise is low. The fault is small. The service life is long. The gear parts are made of ductile iron and bearing steel.
2. bearing. Gear box. Away from the valve body. Avoid the influence of high temperature dust. The front and rear covers are well sealed to prevent dust leakage and prolong the service life of the moving parts.
3., it has strong overload capacity, low impact torque and is suitable for frequent starting and reverse rotation.
4. by adopting the principle of planetary rotation, the input and output are on the same axis, and have the uniqueness of the direct connection with the motor, so the compact structure is beautiful and novel, small in volume and light in weight.

Dust Collector Fittings

Dust Collector Fittings,Pulse Solenoid Valves,Star Dischargers,Wind Blockage Vales

Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.com