Sinotruk HOWO Truck Spare Parts

Sinotruk HOWO Truck Spare Parts


.  Focused on special automobiles' design and production for nearly 10 years.
. Obtained the ISO9001 international quality management system certification.
. Achieved foreign trade qualification granted by Chinese government.
. Manufacturer direct sale,quality guaranteed, low price.
. Europe Emission Standard 2/3/4/5.
. Except standard products, also customize products according to your requirements.

Parameters
Related Product

-- Sinotruk/Weichai engine parts

Crankshaft, connecting rod, cylinder block, cylinder head, piston,flywheel, cylinder liner,piston ,piston rings, piston pin,connecting rod,bearing, crankshaft bearing ,intake&exhaust valve, valvesprings,camshaft, tappets, camshafts bearing, fuel tank, fuel pump, fuel filter,air filter, oil filter, battery,alternator, starter, starter motor, ignition coil,water pump, radiator, fan couplings, fan, thermostat, oil pump,pressure limiting valve ..

--Sinotruk/FAST Gearbox Parts

Primary shaft, 2nd shaft, intermediate shaft, 2 / 3 associated gear,2nd speed gear(1/2/3/4/5) , reverse gear ,intermediate shaft(1/2/3/4/5),synchronize assembly, synchronizer slider,gearbox ,gearbox shell, gearbox cover, gearbox middle cover, shift fork assembly, PTO...

--Chassis parts

Cabin parts



Our Service

1.. Reply your inquiry in 12 working hours;
2. Experienced staffs answer all your questions;
3. Customer's design is available for certain products(OEM);
4. Spare parts for all types of engine machinery with reasonable price;
5. Different brand of trucks can be provided with competitive price.

Contact Person


 

Sinotruk HOWO Truck Spare Parts


.  Focused on special automobiles' design and production for nearly 10 years.
. Obtained the ISO9001 international quality management system certification.
. Achieved foreign trade qualification granted by Chinese government.
. Manufacturer direct sale,quality guaranteed, low price.
. Europe Emission Standard 2/3/4/5.
. Except standard products, also customize products according to your requirements.

Parameters
Related Product

-- Sinotruk/Weichai engine parts

Crankshaft, connecting rod, cylinder block, cylinder head, piston,flywheel, cylinder liner,piston ,piston rings, piston pin,connecting rod,bearing, crankshaft bearing ,intake&exhaust valve, valvesprings,camshaft, tappets, camshafts bearing, fuel tank, fuel pump, fuel filter,air filter, oil filter, battery,alternator, starter, starter motor, ignition coil,water pump, radiator, fan couplings, fan, thermostat, oil pump,pressure limiting valve ..

--Sinotruk/FAST Gearbox Parts

Primary shaft, 2nd shaft, intermediate shaft, 2 / 3 associated gear,2nd speed gear(1/2/3/4/5) , reverse gear ,intermediate shaft(1/2/3/4/5),synchronize assembly, synchronizer slider,gearbox ,gearbox shell, gearbox cover, gearbox middle cover, shift fork assembly, PTO...

--Chassis parts

Cabin parts



Our Service

1.. Reply your inquiry in 12 working hours;
2. Experienced staffs answer all your questions;
3. Customer's design is available for certain products(OEM);
4. Spare parts for all types of engine machinery with reasonable price;
5. Different brand of trucks can be provided with competitive price.

Contact Person


 

PERSONAL PROTECTION

 It is essential that the operator and helpers be properly clothed and protected because of the heat, ultra-violet rays, and sparks, produced by the arc welder (See Figure 3). For body protection a pair of fire retardant long sleeved coveralls without cuffs is a good choice. Always avoid clothing with tears, snags, rips, or worn spots as these are easily ignited by sparks. The sleeves and collars should be kept buttoned. The hands should be protected with leather gauntlet gloves. A pair o high top leather shoes, preferably safety shoes, is good protection for the feet. If low shoes are worn the ankles should be protected by fire resistant leggings. Eyes should be protected by transparent goggles if the person wears prescription glasses or safety glasses if not. A welding helmet or hand shield with filter plate and cover plate is mandatory for eye protection from the harmful rays of the arc. The filter plate should be at least shade #10 for general welding up to 200 amps. However, certain operations such as carbon-arc welding and higher current welding operations require darker shades. Never use a helmet if the filter plate or cover lens is cracked or broken. A flame-proof skull cap to protect the hair and head as well as hearing protection in noisy situations is recommended.
Plastic disposable cigarette lighters are very dangerous around heat and flame. It is very important that they not be carried in the pockets while welding. Always provide protection to bystanders or other workers by welding inside a properly screened area, if possible. If unable to work inside a screened area then protection to others should be provided by a portable screen or shield, or by their wearing anti-flash goggles.

SAFE OPERATION OF THE WELDER

It is important that anyone operating an arc welder be instructed on its safe use by a qualified teacher or welder.
Because of their potentially explosive nature, we strongly recommend that no welding, cutting, or hot work be attempted on used drums, barrels, tanks, or other containers under any circumstances.

If possible, work to be welded should be placed on a firebrick surface at a comfortable height. Welding should never be done directly on a concrete floor. Heat from the arc can cause steam to build-up in the floor which could cause an explosion. The welder cables should be positioned so that sparks and molten metal will not fall on them. They should also be kept free of grease and oil and located where they will not be driven over.

Electric welders can kill by electric shock. If the welding operation must be done on steel or other conductive material an insulating mat must be used under the operator. If the welding area is wet or damp or the operator is actively perspiring then he/she should wear rubber gloves under the Welding Gloves.

It is easier and safer to establish an arc on a clean surface than a dirty or rusty one. Therefore, metal should always be thoroughly cleaned by wire brushing or other method prior to welding. When chipping slag or wire brushing the finished bead the operator should always be sure to protect his eyes and body from flying slag and chips. Unused electrodes and electrode stubs should not be left on the floor as they create a slipping hazard. Hot metal should be handled with metal tongs or pliers. When quenching hot metal in water it should be done carefully to prevent painful burns from the escaping steam. Any metal left to cool should be carefully marked "HOT" with a soapstone. When welding is finished for the day or suspended for any length of time electrodes should be removed from the holder. The holder should be placed where no accidental contact could occur, and the welder should be disconnected from the power source.

SAFETY PRECAUTIONS FOR ENGINE POWERED WELDERS
Always operate in an open well-ventilated area or vent the engine exhaust directly outdoors.
Never fuel the engine while running or in the presence of an open flame.
Wipe up spilled fuel immediately and wait for fumes to disperse before starting the engine. *Never remove the radiator pressure cap from liquid cooled engines while they are hot to prevent scalding yourself.
Stop the engine before performing any maintenance or trouble shooting. The ignition system should be disabled to prevent accidental start of the engine.
Keep all guards and shields in place.
Keep hands, hair, and clothing away from moving parts.
FIRST AID

The welding area should always be equipped with a fire blanket and a well stocked first aid kit. It is desirable that one person be trained in first aid to treat the minor injuries that may occur. All injuries, no matter how minor they may seem can become more serious if not properly treated by trained medical personnel.
KEY POINTS TO REMEMBER
Be sure the welder is properly installed and grounded.
Never weld without adequate ventilation.
Take proper precautions to prevent fires.
Protect your entire body with fire retardant clothing, shoes, and gloves.
Wear eye protection at all times.
Weld only in a firesafe area.
Never do any welding, cutting, or hot work on used drums, barrels, tanks, or other containers.
Mark metal "HOT" with a soapstone.
Keep a well stocked first aid kit handy.

Welding Protection

Welding Protection,Auto-Darkening Welding Helmet,Welding Gloves,Welding Glasses

Changzhou Edaweld Trading Company Limited , https://www.edaweld.com