Roller Shell - Pellet Mill Roller Shells for Sale
Model NO.: FDSP CPM MUYANG
Separated: Separated
Brand: Fdsp
Name: Roller Shell - Pellet Mill Roller Shells for Sale
Application: For Ring Die Pellet Mill
Customized: Cpm, Muyang, Bulher
Trademark: Liangyou
Transport Package: Iron Case
Specification: CE, ISO, SGS
Origin: Jiangsu, China
HS Code: 8436100000
Type: Honey-comb type, teeth or customized
Application: Spare parts for pellet mill, such as feed pellet mill and biomass pellet mill
Our roller shell is compatible with pellet mills from CPM, BULHER, MUYANG, etc.
Features of FDSP Roller Shell:
1. Made of wear-resistant alloy raw material, processed through fine and heat treatment.
2. Crafted from bearing steel, offering high hardness, excellent wear resistance, and long service life. Various tooth depths and shapes are available.
3. The tooth surface design enhances pelleting performance.
4. Common tooth forms include honeycomb, scallop shape, and scallop shape with edge banding.
5. Honeycomb and scallop-shaped roller shells are primarily used in livestock and poultry feed pelleting.
6. The advantage of honeycomb roller shells is even ring die wearing, but coil performance is less ideal.
7. Scallop-shaped roller shells provide better coil performance and are widely used in feed mills, though they may cause uneven ring die wearing.
8. Scallop shape with edge banding is suitable for aqua feed, preventing the feed from sliding sideways during extrusion.
Plenty of pellet mill parts are in stock.
Product Description:
Roller shell, commonly referred to as a roller, is one of the main working components in a pellet mill. It is used for processing various types of biomass fuel granules, animal feed pellets, and other pellets. Made from wear-resistant alloy steel with carburization heat treatment, it offers even hardness and a long service life. It is available in tooth-through type, tooth-no-through type, and pass type. Components like inner eccentric shafts are precisely manufactured, allowing customers to adjust the space between the roller and ring die according to production needs. It is also easy to mount and replace.
Notice:
1. Select the correct die hole compression ratio.
2. Adjust the working clearance between the ring die and roller, ideally between 0.1 and 0.3 mm. (After starting a new pellet mill, the roller, driven by the ring die, enters a pre-running state but does not rotate.)
3. New ring dies should be used with new rollers. The roller connecting to the ring die must be loose at the front and tight at the back. If sharp corners appear on both sides of the roller, use a hand grinder to blunt the flange part for a better connection.
4. Before feeding raw materials into the pellet mill, perform precleaning and magnetic separation to minimize iron impurities entering the die holes. Regularly check the die holes for blockages and clean them as needed.
5. If plastic deformation occurs in the ring die guiding cone hole, causing the hole to shrink, repair it immediately. During repair, ensure the lowest height of the ring die inner surface is 2mm higher than the bottom of the overtravel groove. Additionally, the eccentric shaft adjustment must allow an extra space; otherwise, the ring die should be scraped.
[Image: Roller Shell for Ring Die Pellet Mill (Simi630)]
[Image: Roller Shell for Ring Die Pellet Mill (Simi630)]
[Image: Roller Shell for Ring Die Pellet Mill (Simi630)]
Shaping Yoga Equipment
Fabric wrap protection body fitness gym accessories are designed to provide support and protection to various parts of the body during exercise and weightlifting. These accessories are made of high-quality fabric that is durable and breathable, ensuring maximum comfort and support.
Some of the most popular fabric wrap protection body fitness gym accessories include wrist wraps, knee wraps, elbow wraps, and ankle wraps. These accessories are designed to provide compression and support to the joints, helping to prevent injuries and reduce pain and discomfort.
Wrist wraps are commonly used during weightlifting exercises that put a lot of strain on the wrists, such as bench press, overhead press, and deadlifts. Knee wraps are used to support the knees during squats, lunges, and other leg exercises. Elbow wraps are used to provide support and compression to the elbows during exercises that put a lot of stress on the joints, such as bicep curls and tricep extensions. Ankle wraps are used to provide support and stability to the ankles during exercises that require a lot of jumping and lateral movement, such as plyometrics and agility drills.
Shaping Yoga Equipment,Latex Drawstring,Latex Elastic Drawcord,Elastic Drawcord
Changzhou Golden Oak Rubber Plastic Polymer Co.,Ltd , https://www.czjnsatee.com