LPG Turbine Pump Lwb-150

Posted on

Product Specifications

The LWB-150 LPG Turbine Pump is a compact and efficient transfer pump designed for use between tanks or cylinders. It is easy to operate, cost-effective, and ideal for small-scale LPG applications.

LPG Turbine Pump LWB-150

Overview of the LWB-150 LPG Turbine Pump

Designed for high differential pressure applications, this pump is suitable for both underground and above-ground tank operations.

It offers a cost-effective alternative to submersible pumps and meets various demands in LPG transfer scenarios.

Whether you need a low or high flow rate with high pressure, the LWB-150 is an ideal choice for dual-hose LPG dispensers.

The pump features a continuous-duty design, making it reliable for long-term use, and its serviceability is simple and economical.

LPG Turbine Pump LWB-150

LPG Turbine Pump LWB-150

Mainly used for liquefied petroleum gas (LPG) cylinders and other similar chemical products with comparable suction properties.

Usage Instructions:

  1. Connect the pump inlet to the cylinder, open the valve angle, and place the cylinder upside down. Ensure the cylinder outlet is higher than the pump for better performance. Check the pressure gauge; normal pressure should be around 2 kg.
  2. Turn on the pump outlet and exhaust the air from the pump. Then, activate the cylinder and open all switches.
  3. Test the pump by manually rotating the wheel to check for any internal issues. Start the power switch and ensure the pump operates properly.
  4. When parking, empty the tank, cut off the power, and close the valve.

Important Notes:

  • Before using, ensure that the voltage and current match the motor's specifications, especially if using household two-phase electricity, to avoid damaging the motor.
  • Do not invert the pump during operation. If no fluid is being discharged, stop the pump immediately and check the inlet for liquid to prevent damage.
  • For weighing, use an electronic scale to monitor the cylinder’s content. If there is water in the cylinder, especially in winter, it may cause ice blockage and lead to failure.
  • If the pump shows no pressure or no liquid, check the connections, valves, and filters. For vibration or noise, check if the outlet valve is open or if the bearing is damaged and replace if necessary.
LPG Turbine Pump LWB-150

Additional Information

This pump is specifically engineered for LPG transfer in various settings. Its durable construction and user-friendly design make it a popular choice among professionals and hobbyists alike. Whether you're transferring LPG from one container to another or refilling cylinders, the LWB-150 ensures smooth and safe operation. With regular maintenance, it can serve you for many years without major issues.

PEUGEOT Connecting Rod

In the suspension system of a Peugeot car, the connecting rod is usually made of metal material, which has a certain strength and rigidity. It connects the wheel suspension bracket and other components of the suspension system, such as shock absorbers, springs, etc. Through the connection of connecting rods, the suspension system can better absorb and disperse the impact force of the road surface, providing better driving comfort and stability.

Peugeot Connecting Rod,Engine Parts Connecting Rod,Small Engine Parts Connecting Rod,Connecting Rod Bearing

Wuhu Hangtian Automobile Connecting Rod Co., Ltd , https://www.htconrod.com