Glass Sucker for Handling and Transport

Posted on

  • Model NO.: SH-XD4-04 (A)
  • Certification: CE, UL
  • Control System: Electric Integration
  • Drive Mode: Electric
  • Color: Yellow
  • Suction Cup Material: NBR or Silicone
  • Weight: 75kg
  • Application: Glass Installation, Glass Gripping and Transport
  • Specification: CE
  • HS Code: 8428909090
  • Type: Glass Lifting Machine
  • Structure: Vertical
  • Condition: New
  • Structure Material: Steel
  • No. & Size of Suction Cup: 4 Pads, 300mm Diameter
  • Overall Size: 1000mm (L) * 940mm (W) * 300mm (H)
  • Max. Lifting Capacity: 400kg (4 Pads)
  • Trademark: SHENGHENG
  • Origin: Foshan, China
With years of remarkable exploration, trial and innovation, our Vacuum Lifting

Equipment has reliable quality and its unique technology, to ensure easy and

safe transport.

CHOOSE US, BENEFIT YOU.

1) Labor cost saving.

2) Increased productivity thanks to timesaving operation.

3) To work ergonomically and protect operator healthy.

4) Excellent work safety and process reliability thanks to unique vacuum automatic compensation system.

5) No applied mechanical damage caused by using the lifter.


1. PRODUCT DESCRIPTION
The lifter is designed for manual operation. The entire system consists of electric vacuum gripping

device, manual tilting device, manual rotation device, and safety protection system, to achieve gripping,

lifting, moving and placing glass to specific location by a serial of process setting. The lifter can be

assembled to various kinds of models to fit for different size of glass.
Glass Sucker for Handling and Transport

2. PRODUCT CHARATERISTICS
Code SH-XD4-04 (A)
Size (mm) 1000mm (L) * 940mm (W) * 300mm (H)
Weight (kg) 75kg
Driven System Electric Components Integration
Suction Cup Round sucker; NBR material; oil & abrasion resistance; location adjustable; with buffer spring for height compensation
No. & Size of Cups 4 pads; 300mm diameter
Structure X type; steel material; ergonomic design
Max. Glass Size 3000mm (L) x 2000mm (W) x 4-25mm (T)
Min. Glass Size 1000mm (L) x 1000mm (W) x 4-25mm (T)
Max. Lifting Weight 400kg
Lifting Material Glass, marble, plastic boards, metal sheets, coated boards and other plates.
Usage Gripping, lifting and handling in the glass production and processing line, and glass packaging, well used in the glass installation, like curtain wall.
Installation Request Hanged on the pillar jib crane or frame crane or bridge crane; outer electricity supply when charge needed.
Packaging Plywood Case
Delivery Time Within 20 days after receiving the payments
Payment terms L/C, T/T
MOQ 1 set
Supply ability 500 sets per month
Certificate CE, SGS
Others OEM / ODM accepted
 
3. PRODUCT TECHNIQUE
Maximum Loading 400 kg
Factor of Safety 2.5
Standard Working Power 12V DC
Battery Charge 110V / 220V, 50/60Hz
Noise Level < 60 Db
Vacuum Holding time More than 30 minutes after power loss
Gripping Suction cups in vacuum state
Tilting Manual tilt, 90° between upright and flat, with latching in upright position
Rotation Manual rotation, 360° edgewise, with locking at each quarter point
Safety protection Vacuum non-return system and vacuum compensation system
Vacuum compensator When vacuum reaches to the specified pressure, vacuum pump automatically stops to achieve energy saving; when vacuum pressure is insufficient, it automatically restarts to achieve vacuum compensation.
Control method Buttons on the remote control
 
4. SAFETY INSTRUCTION
Factor of safety According to the European CE safety requirements for lifting equipment, and safety regulations on the German accident prevention regulations UVV 18 and VBG 9a, the better safety factor for vacuum lifter is 2.5. For example, each sucker 300mm dia., with suction reaching to 330kgf, divided by the safety factor 2.5, can load 132kg. If the lifter uses 4 suction cups, the total suction is 132*4=528kg, greater than approved glass 400kg. When the glass is handled and transported vertically, it should be multiplied by the coefficient of friction 0.8 (between rubber and glass), 528kg*0.8=422kg, still greater than the approved glass 400kg.
Safety Protection Instruction Once glass sucked, the system is under airtight state. The only entrance for air is backflow from vacuum generator to destroy system's vacuum state. Therefore, the lifter is equipped with the safety non-return valve, for which air can only be extracted from inner system, with no return, and through which it can ensure sufficient vacuum to keep absorption time when power loss.
Vacuum Compensation Protection Not worried about air leakage and insufficient vacuum, because the lifter is equipped with pressure sensor and vacuum compensation system. When vacuum is not enough, the system automatically senses and resumes operation to keep sufficient vacuum.
 

5. APPLICATION SAMPLE
Glass Sucker for Handling and Transport

6. CHOOSE THE RIGHT VACUUM LIFTER FOR YOUR NEEDS:

1) Pneumatically or electrically driven by vacuum system.

2) Pneumatically, manually, or electrically performance/function.

3) Tilting, rotation, or both.

4) For safety, automatic vacuum compensator and safety protection system needed.


We focus on the good quality, but reasonable price. More infomation about company and products,

please kindly click the following website www.fsshengheng.com for your reference, or contact us Email

Syringe Mould is a kind of plastic Medical Mould for disposable plastic syringe production. Syringe Mold includes syringe barrel mold, plunger mold and gasket mold. Our mold is usually made from S136, P20, 60# and Cr12 steel, and its material can also be customized.

Our mold is not only of pretty long working life, reaching 3 million shots, but also always of high precision to promise you high-quality syringes.

Mould Parameter:

Mould Life: 3,000,000 shots

Mould Cavity: Multiple cavities, can be customized

Runner Type: Cold runner, semi-hot runner

Mould Steel: Core and cavities: S136/Cr12/DC53

           Base: 60#/5GrNiMo/4Cr13

(the mould steel can be customized as well)

Product Material: PP/PE

syringe barrel mould

syringe plunger mold

FAQ:

1. How about the delivery time?

About 100 days after your advance payment.

2. How about the payment terms?

Usually it is 30% advance payment before the production and balance payment 70% before the shipment by T/T. Flexible payment can be negotiable.

3. Can we visit your factory?

Sure. Your visit will be much welcomed at any time.

Syringe Mould

Syringe Mould,Syringe Mold,Syringe Needle Cap Mould,Disposable Syringe Mould

Yuhuan Zhengri Technology Co., Ltd. , http://www.syringemachine.com