Full Automatic Main T Bar Roll Forming Machine

Posted on

Brick Raw Material: Steel
Automation: Automatic
Trademark: Saibo
Transport Package: Sea Packing
Specification: one 40GP container
Origin: China
HS Code: 84552210
Brick Raw Material: Steel
Automation: Automatic
Trademark: Saibo
Transport Package: Sea Packing
Specification: one 40GP container
Origin: China
HS Code: 84552210
General properties:
  1. FAST
  2. Fast: 6 pieces 3660mm main t per minute. 35 pieces 600mm Cross t per minute.
  3. Automatic: Fully automatic, no need labor to punch and run machine.
  4. Save: save labor and save time
  5. Technology: with full own technology. Length and Punch is accurate. No more than 0.5mm tollerance
Main technology for main T:
  1. Main motor :4kw
  2.  Hydraulic power: 15kw
  3. Machine length 6000mm x width 600mm;
  4. Length of punching mold is 4500mm,width is 500mm,
  5. Machine structure is precise 25mm stand structure. Working table is 30mm smooth plate
  6. Transmission by 4kw transducer. Speed is 30m/min, production capacity: 6 pieces which length in 3660mm per minute
  7. High speed hydraulic cut system, pressure is 30ton, including 3 pieces knives, continuity working, NON-STOP
  8. Decoiler is 250-550 OD, 1 ton, passive working
  9. Main station is 18 stations, rectify 1 station. Roller diameter min is 110mm, Cr12 material. Hardness is HRC60 degree
  10. PLC station, with servo trace cutting
  11. Bearing use famous china brand
  12. With one set spare parts
  13. Total weight of machine is about 6.5ton
  14. Hydraulic cut include 22 punching molds,2 punching heads
  15. Color of machine: base on customer request
  16. Voltage, Frequency, Phase: 380V, 50HZ, 3pahse (or base on customer request)
☆. complete line (exactly one needs base on finished machine):
  1. About25m long*2.0m wide*1.5m high
  2. Weight: about 8T total
  3. Complete line speed:0-30m/min
  4. Color of machine: blue and yellow.
Full Automatic Main T Bar Roll Forming MachineFull Automatic Main T Bar Roll Forming Machine General properties:
  1. FAST
  2. Fast: 6 pieces 3660mm main t per minute. 35 pieces 600mm Cross t per minute.
  3. Automatic: Fully automatic, no need labor to punch and run machine.
  4. Save: save labor and save time
  5. Technology: with full own technology. Length and Punch is accurate. No more than 0.5mm tollerance
Main technology for main T:
  1. Main motor :4kw
  2.  Hydraulic power: 15kw
  3. Machine length 6000mm x width 600mm;
  4. Length of punching mold is 4500mm,width is 500mm,
  5. Machine structure is precise 25mm stand structure. Working table is 30mm smooth plate
  6. Transmission by 4kw transducer. Speed is 30m/min, production capacity: 6 pieces which length in 3660mm per minute
  7. High speed hydraulic cut system, pressure is 30ton, including 3 pieces knives, continuity working, NON-STOP
  8. Decoiler is 250-550 OD, 1 ton, passive working
  9. Main station is 18 stations, rectify 1 station. Roller diameter min is 110mm, Cr12 material. Hardness is HRC60 degree
  10. PLC station, with servo trace cutting
  11. Bearing use famous china brand
  12. With one set spare parts
  13. Total weight of machine is about 6.5ton
  14. Hydraulic cut include 22 punching molds,2 punching heads
  15. Color of machine: base on customer request
  16. Voltage, Frequency, Phase: 380V, 50HZ, 3pahse (or base on customer request)
☆. complete line (exactly one needs base on finished machine):
  1. About25m long*2.0m wide*1.5m high
  2. Weight: about 8T total
  3. Complete line speed:0-30m/min
  4. Color of machine: blue and yellow.
Full Automatic Main T Bar Roll Forming MachineFull Automatic Main T Bar Roll Forming Machine

Needle Roller Bearing

Needle Roller Bearing,Needle Roller Bearings Na 4908,Entities Ring Needle Roller Bearings

Autos Ball Bearing Co., Ltd. , http://www.qdrollerbearing.com