Color Dose Mixer Single Shaft

  • Model NO.: CM3020
  • Application: Granules
  • Application Area: Daily Chemical
  • Additional Capabilities: Dosing
  • Condition: New
  • Transport Package: Tri-Ply Wooden Case
  • Mixer Type: V-Mixer
  • Certification: CE
  • Layout Type: Verticle
  • Operating type: Continuous Operating
  • Trademark: SIMI
  • Origin: China
CM SERIES VOLUMETRIC DOSER
 
    CM series volumetric dosers are suitable for auto-proportional mixing of virgin materials, regrinds, master-batch or additives. Brusheless DC motors are adopted. According to the proportion and data set up, its micro-computer control system turns into referred speed, drive the precise SS304 dosing screw by the coupling, throw out the required material into injection machine. Its error value is below 1%. Give a total of six models with output ranging from 0.1~100kgs /hr. Double color dosers can be assembled from two single color dosers if required. Five components automatic mixing can be realized if customers adopt four color dosers.


 
MODEL SINGLE DOUBLE
CM3025 CM3020 CM3016 CM5025 CM5016   CM-D30/30 CM-D30/50 CM-D50/50
Motor(W) 50 50 50 50 50 30×2 30×2 30×2
Speed(rpm) 3000 3000 3000 3000 3000 3000 3000 3000
Mixing(W) 90 90 90 90 90 90 90 90
Screw 25 20 16 25 16 * * *
output(kg/h) 1.1-38 0.6-20 0.3-10 0.5-17 0.1- 4 ** ** **
hopper(L) 10 10 10 10 10 12×2 12×2 12×2
ratio 30 30 30 50 50 30 / 30 30 / 50 50 / 50
SIZE
H mm 520 520 520 520 520   615 615 615
W mm 610 610 610 610 610 1045 1045 1045
D mm 335 335 335 335 335 335 335 335
Net weight kg 15 15 15 15 15 33 33 33
(Output based on plastic of ratio 1.2kg/dm³,diameter 2-3mm working continuously for reference. )
  • Mixing Base is Optional Choice.
 
Features:
* Dosing screws are chrome plated for durability.
* Unit is comprised of standard modules for ease of cleaning, disassembly and interchangeability.
* Blender is a standard equipment for double color doser to make the material evenly mixed, while also a optional equipment for single color doser to do so.
* Main material hopper is a standard equipment for double color doser. It is optional for single color doser.
* External signals can be directly interfaced with control box.
* The current operation mode can be recorded, unaffected by power failure so operation would be returned to normal when power is on.
* Forced material cleaning is convenient to replace masterbatch.
* Applicable on extrusion machines, just need to make a few wire replacements.
* Rotating speed can be automatically adjusted according to extruder processing speed, which maintains the fixed proportion of masterbatch.
* 50 units of parameter recipes are available for permanently recording the period of material discharging and finished products weight (for extruder, it is max. Throughput per minute).
* Use brushless DC motor and free from maintenance.
* Both master blockage and overload can be detected, then machine will halt and sound alarm.
* Based on customers demand, some mold cycles can be set to add additives periodically so that micro-metering can be achieved. 

 

Main Features of thick film heating technology 

1. Electric Circuit printed on stainless steel tube surface, to heating the water flow inside. 5 isolation layers sintered on the surface.
2. Large heat transfer area on tube surface; Ramp up and Cool down quickly; High utilization rate up to 93% or above.
3. Fast temperature response, power density is as high as 60W/cm² and heating circuit`s temperature raising rate exceeds 80℃/s.

4. Simple structure, compact profile, various applications



Thick Film Chart

And on the basis of Thick Film Heating Element, we develope stainless steel welding interface Heating Element with large power, which is most suitable for commercial vending machine, such as commercial coffee maker, tea maker and juice maker. 


Large Power Heating Element


40Mm Stainless Steel Welding Heater

40Mm Stainless Steel Welding Heater,Post Weld Treatment,Welding Procedure,Preheating In Welding

XINXIANG JIEDA PRECISION ELECTRONICS CO.,LTD , https://www.tubularheater.de