CO2 Tire Repair and CO2 Tire Inflator Valve

• Model NO.: CC1404
• Trademark: Super Care
• Specification: Standard
• HS Code: 3506100090

• Material: PP, Rubber
• Transport Package: Standard Export Carton
• Origin: Ningbo, China

Products Detail

Why choose us?
Function and User Guide 
 1. The first step is to locate the offending foreign object in your tire.
  2. Remove the Object
  3. Put 2-3 drops of the rubber cement on the tip of the reamer and insert the reamer into the puncture. Work the reamer in and   out while twisting to clean and prep the puncture and apply the cement. This process will also enlarge the hole to that the           plug will fit through; because of this the first couple of insertions can be difficult. Repeat this process 2-3 times to make sure t     the puncture is clean and that there is enough cement in the wound. 
4. Take each end of the repair string(about 70mm long), this is the plug, and roll the center of the string into the needle eye.       Apply 2-3 drops of rubber cement to the end of the needle and 
Push the needle and repair string into the puncture (this can be tricky with smaller punctures) until only about a quarter-inch of the strip is sticking out of the tire's surface.
 5. Make a 1/4 turn with the  handle and pull the needle probe out of the tire. The patch should remain in the tire when you remove the probe.Trim the repair strip that is sticking out of the tire down to about 1/8 of an inch.
6.Use an air compressor to replace any air that may have leaked out of the tire. Your tire should be re-inflated and ready to get back onto the road.

Contact us
Ningbo Super Clean Co.,Ltd.
ADD: No.1, HouCang Industry Zone,
        West Section Yinxian Road, Ningbo China(315153)
TEL:0086-574-89020080,89020081
FAX:0086-574-88255300
Mobile:0086-13858225192
www.nbsuperclean.com
 
 









 

Aluminum plate-bar intercooler, as the important part of engine's supercharging system, it can effectively cool down the compressed air ,

improve the fuel usage rate and prolong engineer life.

Stacked layer oil cooler, high performance better cooling for Motor Cycle,Cars, Refitted Vehicles, etc.

Auto Motor Tube-Fin Radiator for HODA, YAMAHA, VW etc

Advantage:

Light weight, compact construction and high performance.

Fins: offset fin, straight fin, perforated fin, louvered fin, corrugated fin

FAQ

Q1:Could you customize oil cooler/Heat Exchanger?

We can cutomize heat exchanger/oil cooler /intercooler according to your drawings or samples or parameter requirement.

Q2: I want to buy your products, how can I pay?

A :You can pay via T/T

Q3: How can you guarantee the quality?

A: One year's warranty against B/L date.

Q4: If we don`t find what we want on your website, what should we do?

A: You can email us the descriptions and pictures of the products you need, We will check whether we can make it.

Q5: Can we buy samples of each item for quality testing?

A: Yes, we understand quality test is important and we are glad to send the sample for quality testing.

Q6: What is the lead time?

A: Normal : Plate-fin heat exchanger for 2~3 weeks; Tube&fin or stacked layer coolers for 5 weeks. Exact time upon negotiation .

Auto & Motocycle Coolers

Best Transmission Cooler,Auto Transmission Coolers,Auto Engine Oil Cooler

Wuxi Better Technology Co., Ltd , https://www.btheatexchanger.com