The machine for dedusting
*Also used in Chemical, Medical and other industries
1) Tangent air inlet design can first separate bigger dust particles to reduce the load of the filters.
2) High efficiency, particle < 1 um, efficiency > 95%; Particle > 1 um, efficiency > 99.5%
3) 2 or more filters can be controlled together as one unit.
4) The rising air pressure: 0.04~0.05MPa, normally using air blower.
5) High quality filter cloth ensures the de-dust efficiency and wear resistance
Working principle
The machine has a round body composed of three parts: upper body, middle body and lower body. Sleeve filters are fixed on the upper body and hung in the middle body. The dusty air is aspirated into the machine tangently from the inlet which is located on the middle body. After the dusty air enters the jet filter from the dusty air inlet, some large dust will fall down into the lower body. Air with small dust will be sticked on the sleeve while cleaned air will enter inside of the sleeve and come out from cleaned air outlet. With time going by, more and more dust will be sticked on the surface of the sleeve, when the resistance up to some extent, dust will be shaken off by high pressure air which is controlled by the pulse controller. There is one dust scraper in the lower body to collect all the dust and transfer the dust to the airlock discharger.
Â
Technical Parameter List | ||||||
Â
 Type
|
Sleeves length |
Sleeves Area |
Â
Air volume
|
Â
Power (kW)
|
Â
Weight
|
|
mm |
m2 |
m3/h |
Air lock |
Dust scraper |
kg |
|
Â
Â
TBLM-39
|
1800 |
25.7 |
4626-6168 |
1.1 |
1.5 |
1030 |
2000 |
28.7 |
5166-6888 |
1080 |
|||
2400 |
34.6 |
6228-8304 |
1120 |
|||
Â
Â
TBLM-52
|
1800 |
35.2 |
6336-8448 |
1230 |
||
2000 |
38.2 |
6876-9168 |
1288 |
|||
2400 |
46.1 |
8298-11064 |
1364 |
|||
Â
Â
TBLM-78
|
1800 |
51.5 |
9270-12360 |
1720 |
||
2000 |
57.3 |
10314-13752 |
1810 |
|||
2400 |
69.1 |
12438-16584 |
1893 |
|||
Â
Â
TBLM-104
|
1800 |
68.6 |
12348-16464 |
2200 |
||
2000 |
76.5 |
13770-18360 |
2560 |
|||
2400 |
92.1 |
16578-22104 |
2920 |
|||
Â
Â
TBLM-130
|
1800 |
88.2 |
15876-21168 |
2870 |
||
2000 |
98.9 |
17802-23736 |
3012 |
|||
2400 |
117.6 |
16578-22104 |
3160 |
|||
Â
Â
TBLM-168
|
1800 |
113.9 |
22788-30384 |
1.5x2 |
2.2 |
3540 |
2000 |
126.6 |
23802-31736 |
3721 |
|||
2400 |
151.9 |
27342-364566 |
3925 |
|||
Â
English referred to as ICD, full name Industrial Communication Device. This section will introduce the wired communication equipment and wireless communication equipment applicable to industrial control environment in a comprehensive way. Wired communications equipment to address the industrial field of serial communication, professional bus-based communications, industrial Ethernet communications and various communication protocols between the conversion equipment. Wireless communication equipment is mainly wireless AP, wireless bridge, wireless card, wireless lightning arrester, antenna and other equipment.
Telecommunication Casting Parts,Cable Anchor Clamp,Precise Casting Telecommunication Parts,Magnesium Casting Parts
Ningbo Beilun Huari Metal Products Co., Ltd. , http://www.huari-metal.com